Equifits don't fit .......

[Rev-Rider]

After trying the med/lrg t boot w/Velcro, the straps only closed by 1/2 an inch. Traded them in for the xL and they were too tall. Tried the hook type, same issue. Any recommendations on a equifit type boot, for a short thick cannon bone ?

[Kestrel]

I had the same problem when I bough cob-sized ones: the straps were too short when the height was correct. I'm still looking too.

[Little Indian]

Majyk Equipe oots hands down. They were created by an everyday horse person who got tired of boots not fitting and holding up. They're currently hold the highest rating for impact testing on the market and I swear by them. I have switched from my Equifits (I was a die-hard fan) to these and couldn't be happier. I use the Memo Foam open front and ankle boots and definitely abuse them. The velcro and elastic is better than any other boot I've seen (I work at a tack shop) and the price couldn't be better (about a third of the price of Equi-fits).
I am in no way affiliated with the company, just a big fan. Seriously, they're amazing. I'll never use another boot.

You can find info about them here
http://majykequipe.com/
and
https://www.facebook.com/MajykEquipe

[hbm]

Thanks for the feedback on your EquiFit boots. As a representative of EquiFit, I wanted to follow-up as we are often asked about the sizing, especially on the thicker boned horses.

Fitting T-Boots:
-T-Boots fit differently than standard horse boots. Reacting to body heat and pressure, T-Foam™ flows and molds to fit the exact anatomy of any horse’s legs, creating a custom fit boot, every time it’s worn.

- Contrary to traditional boots that are worn loosely, T-Boots must have a snug fit. This may make it seem like the boots are “too small,” but that is not the case. If you own a pair of T-Boots that are slipping or there is a space between the liner and the horse’s ankle, don’t hesitate to tighten them up to maintain proper fit and ensure that they are working properly.

-For optimum elastic stretch, pull the strap out and away from the leg, toward the horse’s head before crossing it over the leg. This method is much more effective in securing the closure.

We are occasionally asked for sizing information for the T-Boots and have developed this size chart for sizing.

Front Boots'
Circumference of Ankle:S/M(in.)<12, M/L(in.)12-12.75, XL(in.)>12.75

Circumference of
Top/Mid Cannon: S/M(in.)<8.5, M/L(in.) 8.5-9, XL(in.)>9

Hind Boots'
Circumference of Ankle: S/M(in.)<11.5, M/L(in.)11.5-12.5, XL(in.) 12.5

Circumference of
Top/Mid Cannon: S/M(in.)<9.5, M/L(in.)9.5-10.25, XL(in.) >10.25

EquiFit boots are designed by horse people with input from top riders, trainers and grooms though out the world (I show in the hunters and jumpers and currently have a 4 yo OTTB project horse) and we pride ourselves on the products we produce. If you are having issues with you boots please take pictures and contact us info@equifit.net.

To date, we are not aware of any boots with the same value of materials. All of our materials and products are hand-crafted in the USA at our manufacturing facility in Dedham, MA (except for our Luxe boots which are made in France) allowing for quality assurance throughout the production process. Most boots today are injection (or machine) molded with neoprene liners. By contrast, each T-Boot is hand-molded and lined with the highest quality T-Foam. Since the T-Foam insert actually does the contouring, T-Boots do not need the extreme contour of molded parts on other boots.

T-Foam is a shock-absorbing material that conforms to each horse’s body for a custom fit, every time with 100% recovery for the next use. Featured in many of EquiFit’s high performance products, this advanced, neoprene-free technology absorbs 97% of shock and vibration under impact. It allows air to circulate, preventing build-up of heat and perspiration, provides pressure-free support and
minimizes dirt and debris build-up known to cause rubs, chafing and abrasions.

Please do not hesitate to contact any of us at EquiFit with your questions. You can reach me directly, hunter@equifit.net or 504-232-6633.

[Kestrel]

hbm, thanks for the sizing information.

[RugBug]

hbm: I've got to say that I've found the straps to be too short as well. I own a TB, with typical TB legs and the M/L boot he needs size-wise barely fits through the straps. I do understand that the boot will give a bit more as the liner warms and molds to his leg, but in order to get the straps more than about a 1/2" to 3/4" on to the velcro, I would be pulling them tight enough to make indentations on his legs. That's not something I'm going to do. They straps simply aren't long enough. I can't imagine trying these on my old warmblood whose legs were no taller but much thicker.

I've also had a problem with the hind ankle boots and the straps being too short. I can hardly get them on and the gap and get a lot of dirt in them. I've got back to my old hind boots as I don't like the amount of debris that gathers in the Tboots.

I love the front boots, but I've got to be honest and admit there are issues with both the fronts and hinds. Maybe it's because I bought the originials, I don't know. Either way, I was disappointed in the hinds and am surprised at the strap length on the fronts.

[Dramapony_misty]

I've heard great things about the fit and quality of Veredus boots. I personally like the look of them better than Equifits too.

[Rev-Rider]

Thx for all the feedback

Hbm:
The xL was a good fit, but too far up his knee.

When I applied the m/l they were very tight, pulled Velcro forward first. The Velcro on the m/l wouldn't even attach 1/4 of th way. I decided to measure his legs and this is what I got.

Ankle Cir. 12.5 in. Mid cannon Cir. 9 to 9.25. Ergot to knee 8.5 in. ??

This is a 1400lb old style 16.3 h. Wb. The 14.3 h pony next to him measured 9 in ergot to knee. Visually I can see he has odd leg proportions.

This was an original t boot, do some of the other styles fit with a lower profile?

[hbm]

Rev-Rider and RugBug, I've sent you each a PM.