The Chronicle of the Horse
MagazineNewsHorse SportsHorse CareCOTH StoreVoicesThe Chronicle UntackedDirectoriesMarketplaceDates & Results
Results 1 to 2 of 2
  1. #1
    Join Date
    May. 9, 2001
    Lake County, IL

    Default Fence Replacements - Reusing Materials or Start Completely Over?

    I am seriously considering buying a horse farm currently for sale, but the fence is IMO in terrible shape. It is 'useful,' as in, will contain horses and does not have sharp points they can get snagged on, but it is very ugly, only 2 boards with a hot wire, and randomly set up around the property.

    If I was to tear all of the fence down and configure it properly, could I still reuse the fence materials? The boards and posts are in very good shape and were put in not too long ago. I would hate to waste all that wood, and in the process of redoing the fencing, save myself some money where I can.

    It is about 6 acres, with 8 paddocks.

  2. #2
    Join Date
    Feb. 6, 2007
    Maryland USA


    Boards are tough to reuse. Installing it you tend to take nominal 16' boards and cut them down to take into account the fact that posts are not installed accurate to 1/32". Taking them down carefully and removing nails takes time, and then when you try to use them half of them will be too short. It can be done if you have more time than money, but if you are paying by the hour, buy new ones. Posts are a better candidate for reuse if they were not cemented in, but if you want to go from 2 board to more, you might want taller posts too.

Similar Threads

  1. Riding and hip replacements
    By Ethan & Ella's Mom in forum Off Course
    Replies: 7
    Last Post: Oct. 19, 2011, 09:26 AM
  2. Eventing and hip replacements...
    By elizabeth Callahan in forum Eventing
    Replies: 8
    Last Post: Oct. 10, 2011, 01:25 AM
  3. REUSING Horse Registration
    By LetsChat in forum Hunter/Jumper
    Replies: 8
    Last Post: Aug. 12, 2011, 01:35 PM
  4. GPA Chinstrap Pad Replacements?
    By Laguna 007 in forum Off Course
    Replies: 9
    Last Post: Mar. 24, 2010, 10:05 PM
  5. Replies: 8
    Last Post: Jul. 22, 2009, 08:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts