The Chronicle of the Horse
MagazineNewsHorse SportsHorse CareCOTH StoreVoicesThe Chronicle UntackedDirectoriesMarketplaceDates & Results
Results 1 to 11 of 11
  1. #1
    Join Date
    Aug. 11, 2003

    Default Can you square bale a round bale? ... Tamara?

    Called the local feedplace that is selling orchard grass. They didn't have any today but would be bailing later today so would have some tomorrow. I was a little surprised as they had previously told me it came from CO. Plus, nothing is growing around here, so I was confused. The guy then explained to me that they buy round bales and make them into square bales?? I asked if that was even possible and he said "it takes a bit of work". He said that's how they manage to keep it at $9/bale rather than the going rate around here of $13/bale just now.

    Has anyone heard of this before? I thought Tamara might be able to give me some insight into how possible this is? Right now I have a vision of them unrolling round bales, making them into windrows and then taking a square baler over them.

  2. #2
    Join Date
    Apr. 14, 2006


    Absolutely possible!! We have done it for our own use before...but...the quality of the round bale can be an issue. The outside layers of a round bale may be weathered, rotted or at the least discolored. When squaring rounds we unroll off a hay spear at the baler and stuff it in the hopper. If they are disposing of the outer layers it's probably ok, but if they are mixing the outer "junk" with the inner hay you may be buying moldy trash mixed with good hay!!
    Breeders of Painted Thoroughbreds and Uniquely Painted Irish Sport Horses in Northeast Oklahoma

  3. #3
    Join Date
    Apr. 4, 2007
    Jasper, GA


    It is done all the time and a great way for resellers to hide the bad hay on the edges of the round bale. also, beware of Bermuda that has been re-baled, it becomes to fine and can cause colic.

    but it is standard practice these days as square bales are a PITA to bale and collect out of the field, unless the Farmer has expensive equipment. Round balers are cheap and make moving the hay easier.
    Luistano Stallion standing for 2013: Wolverine UVF

  4. #4
    Join Date
    Jan. 30, 2007


    On a practical level, I find that flakes of hay that have been re-baled tend to fall apart easily, but that just means a bit more sweeping up.
    Founder of the I LOFF my worrywart TB clique!
    Official member of the "I Sing Silly Songs to My Animals!" Clique

  5. #5


    there are special machines called Dew Ez Slicers that cause the round bales to be both un spun and recut

    this product goes into something like a NH 575 and can be rebaled into small that way...

    but it's messy,dusty,expensive and the round bales are RARELY worth the effort as the quality is so low to begin with

    we have looked into compactors to make rounds into a 3x3x5 or some such but we are just to busy to fiddle with yet another "project" :>

    Production Acres,Pro A Welsh Cobs
    I am one of the last 210,000 remaining full time farmers in America.We feed the others.

  6. #6
    Join Date
    Sep. 2, 2005
    Upstate NY


    Yepper, they make machines (as Tamara mentioned) for that.

  7. #7
    Join Date
    Sep. 5, 2011


    Two of my local hay dealers sell hay like this, but there's a HUGE difference between the two.

    One grows, cuts, & bales his own hay, & is very intimately involved in the quality, curing, etc. I've yet to get even one bad square-baled-from-a-round-bale bale from him.

    The second is simply a middle-man dealer, & he sometimes gets good deals on local round bales that have been re-baled square. I stopped buying these from him months ago - just had far too many bales that were moldy in the middle. Although he always makes good on bad bales, having to return or complain just got too tiresome for me. So now I only use him for the absolutely pristine & lovely 100#-120# bales of Montana alfalfa he sells.

  8. #8
    Join Date
    Dec. 28, 2009


    It's done around here as well (VA). The hay producer I know of that uses this process stores the rounds he produces under cover and then rebales them as needed.

    He sells some as rounds and then when he gets an order for squares he can rebale.

    I've never bought any of the rebaled, but I've bought the rounds and they are high quality orchard grass rolls.

    He had to go this route as finding people willing to help pick squares and stack squares during the heat of the summer was very hard. By doing rounds he can keep up with the work and produce squares when things are a little slower.

  9. #9
    Join Date
    May. 5, 2000
    Aiken, SC


    One of the hay suppliers here does it. I refuse to buy from them any more. The coastal gets too chopped up and fine. Bad hay is easily mixed in with the good to hide yet you still pay the same price.

  10. #10
    Join Date
    Jun. 24, 2005
    Lorena, Texas


    A lot of places in Texas are doing that now - square bales are hard to find so they're bringing in rounds and rebaling them.

    Since we can't find square bales, either, I'm about to start buying rebaled hay. It is better than nothing...
    Visit us at Bluebonnet Equine Humane Society -

    Want to get involved in rescue or start your own? Check out How to Start a Horse Rescue -

  11. #11


    Quote Originally Posted by pds View Post
    One of the hay suppliers here does it. I refuse to buy from them any more. The coastal gets too chopped up and fine. Bad hay is easily mixed in with the good to hide yet you still pay the same price.
    the nature of the slicing machine is to both unroll and cut...the cutting action is VERY useful in hard core big rounds...which no one uses as they can't/won't afford a baler upgrade (think push mower to small riding tractor for a comparison)

    so in the bales made from cheaper balers (soft core and small) the cutting and side to side action of the slicer actually destroys the leaf still attached to any stem from things like alfalfa (where the leaf is the gold) and further shortens things like second cuttings into lawn trimmings

    for a hard core large bale of a thick deep first cutting it's great,nothing can beat it

    however,that is 10% of the hay world....

    Production Acres,Pro A Welsh Cobs
    I am one of the last 210,000 remaining full time farmers in America.We feed the others.

Similar Threads

  1. DIY big square bale feeders - Any ideas?
    By EquusMagnificus in forum Around The Farm
    Replies: 17
    Last Post: Jan. 15, 2011, 05:09 PM
  2. Bale Buddy/Round Bale Feeders. Anyone?
    By jse in forum Horse Care
    Replies: 3
    Last Post: Dec. 23, 2009, 10:23 PM
  3. Replies: 3
    Last Post: Dec. 12, 2009, 10:22 PM
  4. round bale spin off
    By millerra in forum Around The Farm
    Replies: 4
    Last Post: Nov. 25, 2009, 11:58 PM
  5. Another round bale question....
    By Kaytaz86 in forum Horse Care
    Replies: 14
    Last Post: Oct. 7, 2009, 03:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts