The Chronicle of the Horse
MagazineNewsHorse SportsHorse CareCOTH StoreVoicesThe Chronicle UntackedDirectoriesMarketplaceDates & Results
 
Results 1 to 19 of 19
  1. #1
    Join Date
    Apr. 3, 2005
    Location
    Idaho
    Posts
    965

    Default What type of wood is best?

    I was reading a thread someone posted about the thickness of wood for building stalls and it got me thinking. One day I hope to be able to build my own barn and was wondering what wood does everyone prefer? There seems to be a lot of types to choose from and some are softer then others. Is it better to get softer wood like pine or something stronger like oak? I would like to read others thoughts on this.



  2. #2
    Join Date
    Jul. 23, 2003
    Location
    itty bitty town, GA
    Posts
    3,004

    Default

    We prefer hardwoods and in particular, rough cut Oak. Pine is way too soft unless it's pressure treated. Pressure treated hardens pretty well to deter the chewers, but Oak is my favorite (also is usually the most expensive). When we moved to the place we have now, over 13 years go, we lined most of our stalls with rough cut oak and there has been very little chewing on them because the oak is so hard.
    Susan N.

    Don't get confused between my personality & my attitude. My personality is who I am, my attitude depends on who you are.



  3. #3
    Join Date
    Apr. 3, 2005
    Location
    Idaho
    Posts
    965

    Default

    Yeah, I think oak would be the way to go. About how much more is oak over the cost of pine. A couple of dollars?



  4. #4
    Join Date
    Feb. 16, 2003
    Location
    MI USA
    Posts
    7,801

    Default

    We also used the rough cut Oak for inside the stall. We got ours green from the sawmill. You need to use galvanized or stainless steel nails, to prevent the heads rusting from the tannin in the boards. Fun to watch the boards pop loose! Also with the green stuff, it will shrink over time, no matter how tight you fit it during construction. So some small gaps between boards are going to happen with ANY green lumber.

    You would have to call the sawmill, get prices from them. Prices can change. Sometimes a quantity discount is available, so they have the work for employees with assured sale of wood. Rough is cheaper than smooth, less work involved. Sawmill is usually less expensive than a lumberyard or chain store. Tree to boards, no long distance shipping to add to costs, because you pick wood up or have sawmill deliver to you. Rough cut is also thicker boards, not shaved down to reach smooth sizes. Still not a true 2" x 10" or any of the sizes used, but closer to actual measurements than more smooth lumber will be. Thicker wood takes horse abuse better in most cases, though I always recommend double walls between stalls.

    Our green boards had the rough finish and tasted bad with the tannin in them. We still put metal edging around the inside of window to prevent bored horses working on the wood.

    Aisle here is finished in smooth faced lumber, no horse can reach that wood, which is soft pine.

    White Oak has a tighter grain and seems to be harder because of that, than Red Oak. Both are common trees around here. Other Oaks might be more available for lumber in your area.



  5. #5
    Join Date
    May. 3, 2004
    Location
    Ontario
    Posts
    1,054

    Default

    We used rough cut hemlock for our shelter.
    VERY hard!



  6. #6
    Join Date
    Mar. 19, 2004
    Location
    Hot & Muggy Beautiful Florida
    Posts
    1,363

    Default

    Oak is way more expensive than pine. We used 3/4" OSB plywood on the interior of our stalls never had a problem. My husband is a contractor and builds barns he said using oak would be 10 times more.
    Ms Robin
    Farm Websites & SEO, Low Prices, Barter available!
    ~No Horses to Slaughter clique~



  7. #7
    Join Date
    Jun. 12, 2002
    Posts
    295

    Default

    We used our own hemlock off the farm.
    Cheryl in WNY
    Horse Kids Kit & Bobby



  8. #8

    Default

    I use White Oak that I cut off my farm and take to a saw mill.
    Quality doesn\'t cost it pays.



  9. #9
    Join Date
    Jan. 28, 2003
    Location
    Hollywood, but not the one where they have the Oscars!
    Posts
    8,036

    Default

    ecobeam
    "You can't really debate with someone who has a prescient invisible friend"
    carolprudm



  10. #10
    Join Date
    Mar. 9, 2006
    Posts
    112

    Default

    We used rough 2" Hemlock. It is holding up excellent to the abuse of the drafts... much better than the PTS the hubby used at the previous barn.

    However, do not believe them when they tell you that horses will not chew hemlock, they can and will if inclined

    Oak was incredibly more expensive in our area than any other lumber... especially at the thickness needed.



  11. #11
    Join Date
    Dec. 2, 2004
    Location
    Eastern Ontario, Canada
    Posts
    1,472

    Default

    I'm using spruce, but I've reinforced it considerably (see posting in 'thickness of wood' thread). Hemlock is strong, but can be splintery. Ash would be very strong. If I were doing this again, I would likely go to a local sawmill instead of the commercial lumber yard, so as to get full thickness wood.



  12. #12
    Join Date
    Nov. 14, 2002
    Location
    Sorta near the Devon Horse Show grounds...
    Posts
    4,450

    Default

    I use Oak for everything- fencing, stalls, you name it. I do have 6 by 6 pressure treated posts for my fencing, but then I have four oak boards on the fencing.

    My stall dividers are over 2" thick oak, about 42" high, with custom made metal on top. The powder coated metal section has a channel bottom, which was measured to fit over top of the oak. The bars are 4" on center- meaning that a horse cannot get a hoof in there, even when rolling.

    I can buy Oak at the Amish mills in this area for considerably less than I would pay for pine. There is simply no comparison in durability.

    BTW...I work for a builder, and the SO is a builder.
    When someone shows you who they are, BELIEVE them- Maya Angelou
    www.americansaddlebredsporthorse.net
    http://www.asbsporthorse.blogspot.com/



  13. #13
    Join Date
    Apr. 3, 2005
    Location
    Idaho
    Posts
    965

    Default

    It looks like Oak seems to be the preferred wood choice. I was wondering, is hemlock dangerous to horses or is that just walnut?



  14. #14
    Join Date
    May. 12, 2000
    Location
    NE TN, USA
    Posts
    6,213

    Default

    Rough-cut Oak. Make sure it's been properly dried.
    “There are two ways to conquer and enslave a nation. One is by the sword. The other is by debt.”
    John Adams



  15. #15
    Join Date
    Dec. 2, 2004
    Location
    Eastern Ontario, Canada
    Posts
    1,472

    Default

    Quote Originally Posted by bellyache View Post
    It looks like Oak seems to be the preferred wood choice. I was wondering, is hemlock dangerous to horses or is that just walnut?
    Hemlock wood (tree) is not dangerous. The hemlock plant, which grows in wet areas, is deadly.



  16. #16
    Join Date
    Apr. 3, 2005
    Location
    Idaho
    Posts
    965

    Default

    Quote Originally Posted by draftdriver View Post
    Hemlock wood (tree) is not dangerous. The hemlock plant, which grows in wet areas, is deadly.
    Oh, thanks. I didn't know that.



  17. #17
    Join Date
    Apr. 1, 2003
    Location
    Cocoa, Fla
    Posts
    4,379

    Default

    Cypress - very bug resistent
    Sandy in Fla.



  18. #18
    Join Date
    Mar. 9, 2006
    Posts
    112

    Default

    Quote Originally Posted by draftdriver View Post
    I'm using spruce, but I've reinforced it considerably (see posting in 'thickness of wood' thread). Hemlock is strong, but can be splintery. Ash would be very strong. If I were doing this again, I would likely go to a local sawmill instead of the commercial lumber yard, so as to get full thickness wood.
    100% agree with you. Our lumber came from a mill, considerably cheaper and much thicker than buying at the local lumber yard. We have everything capped with metal, never thought some of them would figure out how to chew from the underside up.

    Ash is not available locally in board lengths, but they make an awesome tongue for the wagon ... I'd buy this over oak if I could.



  19. #19
    Join Date
    Dec. 14, 2007
    Location
    Wilsonville, Ontario, CANADA
    Posts
    4,588

    Default

    We used 3/4 inch tongue n groove ash and I love it!

    Its a very hard durable wood, it is smooth milled so the grain is evident and beautiful in the wood, we treated it with a turpentine / linseed oil mix before the horses got there which really brought the grain out

    No one has chewed even one smidgen of it so far, it has withstood kicks and cast horses beautifully and because of the oil mixture on it, it also cleans up easily and well

    We have the ash above mid height level and laminated white puckboard on 3/4 inch plywood below to make clean up as easy as possible plus it really brightens up the whole look of the stalls

    Here's what they looked like BEFORE horses!

    http://www.angelfire.com/on3/TrueCol...alls-Feb08.jpg



Similar Threads

  1. wood Run in shed - what kind of wood?
    By back in the saddle in forum Around The Farm
    Replies: 3
    Last Post: Oct. 20, 2011, 10:27 AM
  2. Type of wood for replacement boards
    By ponysize in forum Around The Farm
    Replies: 2
    Last Post: May. 16, 2011, 07:47 PM
  3. What type of wood to line the inside of the barn?
    By dmalbone in forum Around The Farm
    Replies: 8
    Last Post: Sep. 25, 2009, 08:19 PM
  4. What type of wood for your stalls?
    By dmalbone in forum Around The Farm
    Replies: 20
    Last Post: Jul. 17, 2009, 10:39 AM
  5. Replies: 35
    Last Post: Jul. 6, 2009, 07:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
randomness