D. Jumpers Class
1. Jumper Course Design
a. Minimum height for jumps must be eighteen (18)
inches and maximum height twenty-eight (28) inches
for first jumping round.
b. Courses should be attractive, varied, and appropriate
to their setting.
c. Jumps could include brush, triple bar, water, and
d. Brush jump must have a visible bar on top or beyond.
e. An in-and-out is to be considered and scored as two
a. Jump-offs are to occur for any/all ties through 6th
b. The jump-offs are to be over the original course.
170 2012 PtHA Rule Book
c. Jump heights will be increased not less than three (3)
inches and no more than six (6) inches in height for
each jump-off round.
d. The Pinto with the fewest faults will be declared the
e. Number of jumps to be raised is at the discretion of the
f. When jump height reaches 34”, exhibitors will be
timed on the course and those times will be used to
determine the placings if there are ties in the number