PDA

View Full Version : Curb Chain fit question



ctab
May. 5, 2010, 04:36 PM
I have often seen the curb chain on a Kimberwick or Pelham adjusted so the off side goes THROUGH the bit and then under chin. Sometimes this is combined with it connecting to the near side also through the bit. I have seen this on some dressage horses as well.

Now I was taught that is a NO NO. I was taught that the curb should be adjusted so that it is basically behind/above the bit and does not interfere at all. It should be adjusted so that you can get 1-2 fingers in there, depending on the horse and how soon you want the curb action to take place. It should lay flat on the chin and be clear to act when needed and be passive when not.

Can anyone please explain what the purpose it to running it through the bit ring?
Thanks.

Thomas_1
May. 5, 2010, 04:38 PM
I don't see that there's a purpose at all

sansibar
May. 5, 2010, 05:01 PM
We used to put it through the bit on my old eq horse because the hooks would always cut my horses face no matter how much vet wrap we put around them.

Thats why I did it. On my new jumper we have it done up normally since *touch wood* it does not cut him.

Thomas_1
May. 5, 2010, 05:08 PM
You're supposed to ensure that the hooks are on the outside!


If it's correct size and turned so it's flatted and there's no rough metal then it can't rub. If it's rubbing sore then it's not fitted properly.

Seal Harbor
May. 5, 2010, 05:14 PM
Don't forget the lip strap on a pelham - that is what the tiny loops on the shanks of the bit are for, right above where the curb rein attaches, runs through the curb chain, large ring that seems to do nothing in the middle of the curb chain.

Helps to keep the curb chain flat and from moving much.

sansibar
May. 5, 2010, 05:33 PM
You're supposed to ensure that the hooks are on the outside!

Um thanks but we did do that. My horse was just super sensitive to the rubbing there from any part of the hook.

mroades
May. 5, 2010, 07:40 PM
I have always put the chain through the rings, less severe that way. And DITTO the lip strap, to me it is an essential part of the pelham use!

goeslikestink
May. 7, 2010, 05:29 PM
Um thanks but we did do that. My horse was just super sensitive to the rubbing there from any part of the hook.

then the bit it self was to small for the horses mouth

the bit should sit on the bars of the mouth with 1/2 wrinkles showing in the corners of the mouth on the outside this allows the curb chain to be fitted into the chin groove

if one has sores from hooks that curb chian sits in then the bit is length wise is to small or one is

heavy iin the hands and using the curb rein rather than the direct rein
which baiscially means your heavy in the hands - so horse is paying the price by having a sore mouth-a s hes pulling in advasion and your pulling to hang onto his head as in hes strong so tanks - you will not win a battle of horse pulls me - give give give with your hands and sit in your seat and lighten your hands

thus comes down to that more than likely combination of lack of balance from rider and horse - riding error
no horse should have sores from bits or any part of a bit and especially not a hook of curb chain as they are only there to keep the chain in place